English ▼

Webshop » TREATMENT » Suprême colorless with a wax appearance

Suprême colorless with a wax appearance

MAUL-SUPRÊME-WAS LOOK-INCOLORE Suprême colorless with a wax appearance

LE SUPRÊME wax

You can quickly and easily put this colorless wood varnish with wax-look finish on your table. It gives an extremely good protection against scratches, knocks and stains, perfect for all your furniture. Thanks to its wax-look finish, you do not see the varnish but the colors of the wood are accentuated.
The varnish is tested for food contact and has the EN 71-3 toy standard.

BENEFITS:
  • EU eco-label
  • Odorless
  • EN 71-3 Toy standard
  • Tested for food contact
  • Total resistance to food and household stains, scratches and impacts
  • Also protects against scratches, bumps and abrasion
  • Does not yellow
BEFORE VARNISHING:
Use this product only on clean and dry wood.
If the table has been delivered by us, you just have to clean it with a damp rag and it is ready to be varnished.

If you wish to treat the teak cabinets, it is necessary to give them a final fine sanding with a scouring sponge (opening the pores and removing any last bumps that may appear as the wood dries), then wipe with a slightly damp cloth. After that, the cabinet is ready to treat.

USE:
  1. Wipe the table with a damp cloth and shake the jar well.
  2. Apply the varnish with a brush or rag in the direction of the grain. (Never pour the varnish directly on the table this will leave spots)
  3. Equalize after the first coat and dust again.
  4. Now apply the final 1 or 2 coats.
  5. We usually recommend 3 coats. But you can tell when the table has had “enough” varnish when you notice that you are using up almost no varnish and you are just “wetting” the table
Varnish the table along the top, sides and 10 cm at the bottom. That way should wine or cola be spilled it could not penetrate the table along the bottom. We recommend not varnishing the rest of the table so that it can continue to “breathe”.

PROPERTIES:
Usage: INDOOR HOUSE
The product consumes ± 12 - 14 l/m² per coat.
The next layer can be applied after ± 4 hours.

TIPS:
Put your brush in a baggie and hang it up, that way you can reuse it for the next coat.

CAUTION:
Never leave excess varnish on the table.
Never pour the varnish directly on the table this will leave spots.

DIFFERENCE MATTE AND SATIN VARNISH:
 The satin varnish protects better than the matte. The matte finish reflects almost no light making the finish almost invisible, while with the satin look ensures that if there is little light a kind of shine appears that increases the brightness of your room.

But both varnishes provide excellent protection, so finally it's mostly a choice based on the visual result you want: a matte colorless finish or a slightly glossy surface with a darker surface.
Feel free to visit us to see the difference between the two products on our samples of SUAR wood.

€ 40.00

Available